Jet Eraser GT SAS､HDD､SSD High-speed compact data eraser
Easy touch panel operation and erasure certificate output with mounter attached
The Jet Eraser GT series is designed for ease of data erasure operations of SAS and SATA HDDs and SSDs for servers, and is capable of erasing data at a maximum of 30 GB/min. Simultaneous parallel erasure processing is possible even when various types of disks and disks of various speeds are mixed together. Equipped with secure erase functions compliant with various standards.
Supports quick erase, full erase, DoD erase and secure erase compliant with DoD5220 and Sanitize command erase.Zero erasure license cost. |
 |
|
|
SAS HDD SSD high speed data erase system Jet Eraser is
also suitable for data erasure of SAS drives for servers.
|
| Compact data erase-only device for SAS and SATA, HDD/SSD |
| Complete data erasure speed: up to 30 GB per minute |
| Overwrite erase method |
| Stand-alone without PC |
| Wide enough to hold a SAS/HDD with mounter attached for easy operation. |
| Jet Eraser GT series has two models: 4-port and 8-port |
Since each port is independent and can work in parallel asynchronously, when different data capacities or HDDs with different speeds finish early, it is possible to replace the HDD and continue working with the next HDD for more efficient operation.
Simultaneous processing is possible even when SATA, SAS, SSD, etc. are mixed. |
| Each port has its own button that, when pressed and held, can be used to interrupt only that port, allowing work on a defective HDD to be interrupted. |
| Erase mode: Quick Erase, Full Erase, NIST SP 800-88, DoD 5220.22-M (U.S. Department of Defense standard), NSA 130-1, Secure Erase, Enhanced Secure Erase, and 20 other erase methods. |
| Secure, Secure Enhanced Erase enables complete erasure of all sectors, even SSDs |
| License free, zero erasure costs! |
| Logs can be managed and erasure certificates can be issued |
|
| HDD with mounter as it is |
 |
| Mounter removal is not required |
| HDD with mounter attached |
 |
| Wide enough to accommodate HDD with mounter |
| LCD touch screen panel |
 |
| Large screen for easy operation |
| Asynchronous Button |
 |
| Efficient work due to the ability to replace drives asynchronously |
| Stable maximum erase speed of 18GB per minute |
 |
| Stable maximum erase speed of 18GB per minute |
S.M.A.R.T(Drive self-diagnostic function)
|
S.M.A.R.T (drive self-diagnostic function) allows the user to check the degree of drive wear and tear and to make decisions such as error skip settings and re-use.
|
The HDD stand of Jet Eraser
Jet Eraser do not need to remove the mounters of server SAS-HDD
Log of Jet Eraser GT
Dump view
|
After erasing, you can check on the monitor of the main unit to see if the pattern has been securely written.
|
Erase mode of Jet eraser GT
|
*Data erase is a fast overwrite erase of numbers.
1. Quick Erase (the fastest erase method. (In a book, erase only the table of contents)
2. Full erase (erase all sectors)
3. DoD Erase (conforms to the US Department of Defense standard. (Bitwise erase three
times)
4. DoD Erase Compare (DoD erase followed by compare with random bits)
5. Seven-pass erase (conforms to DoD standard. Seven full erase erase bit by bit)
6. Secure Erase (conforms to NIST 800-88. (Completely erases data in all areas)
7. Enhanced Secure Erase (compliant with Extended NIST800-88. (Erase all data with
security commands)
8. NSA Erase (conforms to NSA standards)
|
DoD Erase Compare : Bit-by-bit, 3 times full erase and compare
JetEraser SAS/SSD/HDD logging function
|
1. Output format: Text, CSV, XML, PDF
2. Output: (1) Port (text only) (2) To PC via PC link (text, CSV, XML, PDF)
3. Number of logs stored: Approx. 30,000
4. Log information: (1) Device name and firmware (2) Function (3) Drive information (master side data and copy side data, firmware, serial number, capacity, number of sectors, etc.)
5. Copy area
6. Work results
7. Date
|
Certificate of erasure of Jet Eraser GT
| Product |
HDE-GT400 |
HDE-GT800 |
| No. of port |
4 |
8 |
| Max erase speed |
30GB ／minuit |
| Support media |
SAS、2.5”/3.5”SATA-HDD、SSD |
| Size（W×D×H） |
320 x 284 x 326 mm |
410 X 430 X 440 mm |
| Weight |
5 kgs |
9 kgs |
| Power supply |
AC100～240V、50／60Hz |
| Tempereture/Moisture |
5～40℃、20～80％ |
| Standard |
CE / FCC / UL / RoHS |
Customers who viewed this item also viewed these products
Japanese products expected to increase sales in the future
