Storage Puncher HDD/SSD 6 tons manual destroyer HDPN-04A 

Feature of Storage Puncher HDPN-04A

1. Easy operation by inserting the HDD or SSD into the puncher and moving the handle up and down.
2. Destruction with a maximum load of 6 tons. 
3. Using an oil hydraulic mechanism, anyone can easily destroy HDD with a weak hand power.
4. Since it is a manual type that does not require an electric power, it can be used without any 
    problems even in places where there is no power supply. It has no electric or magnetic influences, it
    is the ideal for work in data centers and server rooms.
5. It can be destroyed without removing the HDD mounter. 
6. You can make 4 holes in one process. 
7. If the bit ( drilling needle) is worn out or damaged, it can be easily replaced with a plus screwdriver.
    Replacement bits are available as an option. 
8. Bend the PC board in a wavy shape at 5 mm intervals to destroy all the memory chips on the board.
9. In addition to HDD, SSD, flash memory such as USB drive and SD can also be destroyed. 
10. Storage puncher is made in Japan.
Brochure of Storage Puncher STPN-30
We are looking for distributors! If you want to introduce this HDD/SSD physical destroyer Storage Puncher to your country, please contact us.

HDD with mounter can be destroyed as it is!

Since the HDD with mounter can be destroyed as it is, the time to remove the mounter can be saved and work efficiency is improved. Of course, the internal drive (bare drive) without a mounter also can be destroyed. 
You can easily and surely make holes and destroy drive just by placing it on the attached tray. 

Can be upgraded to an all-in-one destroyer by exchanging tools for SSD and tape

By replacing the destruction tool for HDD to a tool that can destroy SSDs and flash memories such as USB drives and SD, or a tool that can cut tapes, you can upgrade to a versatile destroyer with a common destoyer body.
Since it can be easily replaced with a plus screw driver, it can be used as a general-purpose destroyer by bringing tools even in the field work. Since it is not necessary to purchase two types dedicated destroyers, it is economical because the installation cost and quantity can be reduced.

The destruction holes of the HDD penetrates the back side

You can easily confirm that the aluminum die-cast surface is destroyed. Therefore, it can be determined that the drive cannot be read, and the drives can be disposed without worry.

Bend the SSD or flash memory board into a waveform and break the chips all over

Movies of Storage Puncher

You can easily replace the bit with plus screwdriver

1. Easy operation.
2. Destruction with 6 tons power. 
3. Using an oil hydraulic mechanism.
4. It can be destroyed without removing the HDD mounter. 
5. You can easily replace the bit with a plus screwdriver.
6. In addition to HDD, SSD, USB and SD can also be destroyed. 
7. Storage puncher is made in Japan.
We are looking for distributors! If you want to introduce this HDD/SSD physical destroyer Storage Puncher to your country, please contact us.

Optional parts of manual Storage Puncher HDPN-04A

Specification of manual Storage Puncher HDPN-04A

Product