Storage Puncher HDD, SSD automated destroyer STPN-10-HS│脱炭素対応製品、カーボンニュートラル対応製品、磁力熱有機ごみ分解処理装置、ポータブル電源リチウムイオン蓄電池、可食インクお菓子プリンター、卒塔婆プリンターのことならカッティングエッジ

NEW Storage Puncher HDD/SSD 12 tons power destroyer STPN-30

Cutting Edge HDD SSD physical destroyer HDPN-30

Feature of Storage Puncger STPN-30

1. Easy operation that allows you to work simply by inserting the disc into the body and pressing the start button.
2. Destruction power of up to 12 tons.
3. It uses oil hydraulic technology and destroy HDDs and SSDs with high power.
4. HDD,SSD and magnetic tape can be physically destroyed by exchanging various tools:world first.
5. Destroy the platter of the recording disc by making 4 holes in the HDD with one destruction.
6. Even if the bit is damaged or worn out, you can easily replace the bit with a plus screwdriver. If you have a spare bit, you can continue working with at any time.
7. Unique function to prevent the destruction shafts from coming off after destruction.
8. It can fold the SSD board in a wavy pattern at 5mm intervals and destroy all the IC chips.
9. Battery drive is possible even in places where there is no power supply, and it is possible to perform destruction work even on-site : world's first
10. Design and production is Japan
Brochure of Storage Puncher STPN-30

Movies of Storage Puncher STPN-30

As an option, there is a cutting tool that cuts magnetic tape,and it is possible to destroy various recording media other than HDD and SSD with one unit. The destruction tool can be easily replaced by simply replacing the tool and turning the screw, and it is not necessary to have multiple main bodies which is vwery convenient at the on-site work places.

Destruction bits penetrates to the back of HDD to destroy the platter

Cutting Edge HDD physical destroyer 4 holes penetrated HDD

You can see that the destruction bits penetrates and reaches back side. Tha platter in the HDD is also completely penetrated and it is impossible to read the data, so it is possible to prevent information leakage.

Function to prevent sticking of the shafts when the HDD is destroyed

During the destruction work of HDD, the shafts may be stuck in the HDD and cannot be removed. When such a situation occurs, work stops and time is wasted.
Storage Puncher places the HDD on an elevating table and moves it up and down with an electric hydraulic pump. The HDD/SSD tools fixed at the top and bottom inside the main body with a strong load of up to 12 tons. After the destruction, the pusher plate peels off the HDD and the destruction tool by the force of the spring, so it is possible to prevent sticking.

Cutting Edge Storage Puncher HDD SSD physical destroyer automatic STPN-10-HS

If you replace the tools, you can destroy SSD and magnetic tape with one body

With SSD tool, USB and CF are also bent in a wavy shape to destroy IC chips

Cutting Edge Storage Puncher HDD SSD physical destroyer-waved SSD1

Cutting Edge HDD physical destroyer-waved destroyed USB

Cutting Edge Storage Puncher HDD SSD physical destroyer-waved CF

With magnetic tap cutting tool, CMT is cut completely

Cutting Edge Storage Puncher HDD SSD physical destroyer magnetic tape

You can easily replace the bit with a plus screwdriver

Even if the bit is damaged or worn out, you can easily replace the bit with a plus screwdriver. If you have a spare but, you can continue working with at any time.

Cutting Edge Storage Puncher replace bit

1. Destruction power of up to 12 tons.
2. It uses oil hydraulic technology and destroy HDDs, SSDs and Magnetic tapes with high power.
3. HDD,SSD and magnetic tape can be physically destroyed by exchanging
various tools:world first.
4. Even if the bit is damaged or worn out, you can easily replace the bit
with a plus screwdriver. If you have a spare bit, you can continue
working with at any time.
5. Unique function to prevent the destruction shafts from coming off after
destruction.
6. It can fold the SSD board in a wavy pattern at 5mm intervals and destroy
all the IC chips.
7. Battery drive is possible even in places where there is no power supply,
and it is possible to perform destruction work even on-site : world's first
8. The body is very small with the size W187 X D289 X H410mm
9. The body weight is not heavy as 18Kgs.
10. The design and production is in Japan

Storage Puncher automoted model optional parts

Name	P/N	Picture	Details
HDD tool + tray	HDDU-03B		HDD destruction tool with tray
SSD/Flash memory tool + tray	SSDU-03B		SSD destruction tool with tray
Magnetic tape tool + tray	LTOU-01B		Magnetic tape cutting tool with tray
HDD destruction bit	HDBT-02-2P		Bits are consumables. If the tip is rounded, the penetration will be difficult to make holes in the HDD. If you have a plus screwdriver, you cn easily replace it.
Battery	BSL1860		Number of destruction with battery operation : about 60 times
Battery charger	UC18YDL2		For BSL1860
Carrying case for automated model	STPN-CS4		4 wheels

Specification of Storage Puncger automated model STPN-30

Item	Description
Name of product	Storage Puncher automated model
Product number	STPN-30
Destruction method	Oil hydraulic
Maximum Load	12 tons
Number of holes	4 holes
Processing time	10 seconds
Replace bits	Possible and easy
Size	W187 × D289 × H410 mm
Weight	Aprox 18 kgs
Option	Replacement bit, Carry delivery bag
Country of production	Japan
	Brochure of Storage Puncher STPN-30

We are looking for distributors!
If you want to be our distributor to introduce this HDD/SSD physical destroyer Storage Puncher to your country, please contact us.